中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

400G QSFP-DD DR4 SM MPO12 Optical Transceiver

Features

QSFP-DD Serial Optical Interface

8x50G PAM4 retimed 400GAUI-8 electrical interface
MPO-12 connector with 8° angled end-face
Up to 500m on SMF with FEC

QSFP-DD MSA Compliant

Hot Pluggable QSFP-DD form factor
Compliant with CMIS5.2

Support Protocol

IEE802.3.bs 400GBASE-DR4 Specification compliant

Low Power Consumption

Less than 10.5W in temperature range of 0 to 70℃

Applications

400Gb/s Ethernet
Data Center
InfiniBand interconnects

现在查询下载

类别

热门产品

产品详细信息

400G OSFP DR4 Specification

400G, QSFP-DD, MPO12 APC,1310nm SMF, up to 500m.

400G QSFP-DD DR4

Functional Block Diagram

400G QSFP-DD DR4

General Description

RQDD-400G-DR4 is a Silicon Photonics 400G (4x100G) DR4 transceiver. RQDD-400G-DR4 is a fully integrated, 425 Gb/s optical transceiver for SMF links up to 500m. RQDD-400G-DR4 transmits data in compliance with the optical interface specification IEEE Std802.3-2018 Section 8 400GBASE-DR4. 400GBASE-DR4 specifies the use of 4-level pulse amplitude modulation (PAM4) at 53.125 Gbaud operating at four parallel channels with wavelength on the range of 1304.5-1317.5nm. The bit rate per lane is106.25 Gb/s, which produces an aggregate data rate of 425 Gb/s by means PSM to the transmit ports of the MPO-12 connector. The received optical lanes are paralleled from the receive MPO-12 connector ports to PIN-PD built in PIC (Photonic Integrated Circuit) to recover the PAM4 for interfacing with the electrical interface via with transimpedance amplifier (TIA) surfaced-mounted to PIC.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	Ts	-40	85	°C
Case Operating Temperature	Top	0	70
Storage Relative Humidity (non-condensation)	RH	-	85	%
Supply Voltage	Vcc	0	3.6	V
Receiver Damage Threshold, per Lane	PRdmg		5.0	dBm

Recommended Operating Conditions

Parameter	Symbol	Min	Max	Unit
Operating Case Temperature	TC	0	70	°C
Relative Humidity (non- condensation)	RH	5	85	%
Power Supply Voltage	Vcc	-3.135	3.465	V
Supply Current	Icc		3182	mA
Total Power Consumption	PC		10.5	W
Bit Rate	BR		425	Gbps

Transmitter Optical Interface

Parameter	Accuracy	Unit
Internally Measured Transceiver Temperature	+/-3	℃
Internally Measured Transceiver Supply Voltage	+/-3	%
Measured Tx Bias Current	+/-10	%
Measured Tx Output Power	+/-3	dB
Measured Rx Received Average Optical Power	+/-3	dB

Receiver Optical Interface

Parameter		Symbol	Min	Typical	Max	Unit
Data rate per lane		BR		53.125		GBd
Modulation format			PAM4
Center Wavelength		λ	1304.5	1311.0	1317.5	nm
Damage threshold		THD	5			dBm
Average receive power, each lane			-5.9		4.0	dBm
Average receive power, each lane			-5.9		4.0	dBm
Receiver reflectance		Rr			-26	dB
Receiver sensitivity, each lane1		SEN	Max(-3.9, SECQ-5.3)			dBm
Stressed receiver sensitivity, each lane		SRS			-1.9	dBm
Rx LOS	LOS Assert		-15		-7.9	dBm
	LOS De-assert				-7.5	dBm
	LOS Hysteresis		0.5			dB

Note:

1. Receiver sensitivity is informative and is defined for a transmitter with a value of SECQ. Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FEC.

Module input characteristics

Parameter	Min	Typical	Max	Unit
Supply Voltage	3.135		3.465	V
Input Differential Impedance	90	100	110	Ω
Differential data input swing			880	mVpp
Differential data output swing			900	mVpp
Bit Error Rate			2.4E-4
Input Logic Level High	2		Vcc	V
Input Logic Level Low	0		0.8	V
Output Logic Level High	Vcc-0.5		Vcc	V
Output Logic Level Low	0		0.4	V

Digital Diagnostic Monitor Accuracy

The following characteristics are defined over recommended operating conditions.

Parameter	Accuracy	Unit
Internally Measured Transceiver Temperature	+/-3	℃
Internally Measured Transceiver Supply Voltage	+/-3	%
Measured Tx Bias Current	+/-10	%
Measured Tx Output Power	+/-3	dB
Measured Rx Received Average Optical Power	+/-3	dB

Package dimensions

400G QSFP-DD DR4

Ordering Information

Part Number	Temperature Range	Distance	Fiber Type	E/O	O/E
RQDD-400G-DR4	0 to 70℃	500m	SMF	Siph DFB	Siph PIN

相关产品

400G QSFP28-DD FR4 CWDM4 2km LC Optical Transceiver

400G QSFP-DD FR4 optical transceiver module, support 400Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions.

400G QSFP-DD DR4 PAM4 1310nm 500M MPO Optical Transceiver

400G QSFP-DD DR4 optical transceiver module, support 400Gb/s and up to 500m transmission on SM fiber, it works in high-speed IDC connection solutions.

400G CFP2 DCO Optical Transceiver Module

400G CFP2 optical transceiver module Used on the system's motherboard Up to2000 km in MAN DWDM application

400G OSFP SR4 MM MPO12 Optical Transceiver IB

Features OSFP Serial Optical Interface 4x100G PAM4 retimed 400GAUI-4 electrical interface Active Optical cable 4 channel VCSEL arrays and 4 channels PIN photo detector arrays Maximum link length of 60m on OM3 or 100m on OM4 OSFP MSA Compliant Hot Pluggable OSFP form factor Compliant to OSFP Module Specification Rev 5.0 Compliant with CMIS 5.2 Support Protocol Compliant with IEEE 802.3db Compliant to IEEE 802.3ck Low Power Consumption Less than 8W in temperature range of 0 to 70℃ Applications 400GBASE-SR4 400G Ethernet Data center

400G OSFP DR4 SM MPO12 Optical Transceiver IB

Features Form Factor: Hot-pluggable OSFP form factor Data Rate: Aggregate data rate of 425 Gb/s and Breakout data rate of 106.25 Gb/s Optical Interface: Compliant to 400GBASE-DR4 and 4x100GBASE-DR Transmitter: EML 1310nm transmitter Electrical Interface: Compliant to 400GAUI-4 and 4x100GAUI-1 Receiver: PIN and TIA array on the receiver side Management Interface: I2C management interface Reach: Up to 500m over MPO-12/APC single mode fiber Power consumption: 9 W max Operating case temperature: 0 ~ 70 ℃ Power Supply: Single 3.3V power supply Compliance Form Factor: OSFP MSA Optical: IEEE802.3bs Electrical: IEEE802.3ck Firmware: CMIS Environment: RoHS Stability: GR-468-CORE Applications 400Gb/s Ethernet Data Center InfiniBand

400G QSFP-DD FR4 2KM Optical Transceiver

Applications 400G BASE-FR4 Ethernet Data Center Interconnect InfiniBand Interconnect Enterprise Networking Features Compliant to QSFP-DD MSA 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-FR4 Specification compliant Maximum power consumption 10W

400G QSFP-DD EDR4 SM MPO12 2km Optical Transceiver

Features IEEE 802.3bs Specification compliant QSFP-DD MSA compliant 4x106.25 Gbps PAM4 optical interface 8x53.125 Gbps PAM4 electrical interface I2C interface with integrated DDM Up to 2km transmission distance on single mode fiber (SMF) with FEC up ply voltage: 3.3 V Maximum power consumption: 12 W MTP/MPO-12 connector Operating case temperature: 0 to 70 °C RoHS compliant Applications 400G Ethernet Datacenter enterprise networking

3端口 200GHZ DWDM 滤波器 DWDM 波分器件

Single channel 3 port 200GHZ DWDM filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

联系我们